Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Yankton, SD

Fleet Washing in Yankton, SD

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard. Typical cost $150-$800.

Looking for fleet washing in Yankton, SD? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts.

How we clean it

Mobile washCleaning method

Is it time for fleet washing?

  • Dirty company vehicles representing your brand
  • Road salt build-up in winter
  • Equipment caked with mud

Why it gets dirty

  • Road grime and salt
  • Job-site mud
  • Exhaust soot

Safe steps for homeowners

  • Rinse salt off undercarriages often in winter

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Wash water runoff at your yard
  • Damage to decals and seals

What happens on the day

  1. Schedule at your location
  2. Pre-treat
  3. Wash and rinse
  4. Detail wheels and trim
  5. Log the vehicles washed

How much does fleet washing cost?

$150-$800Typical range per visit for a small fleet
Depends on fleet sizeTypical time on site
Weekly to monthlyRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Fleet Washing in Yankton, SD

Commercial properties in South Dakota usually get a big spring clean of sidewalks, entrances and parking areas to remove sand, salt and winter litter, and many schedule a second visit in the fall.

Crews serve all of Yankton (ZIP code 57078), plus Vermillion (24.6 mi), Elk Point (38.4 mi), Lennox (42 mi) and Hawarden, IA (46.9 mi). Call (877) 658-5887 for a free quote in Yankton.

Fleet Washing: frequently asked questions

How much does fleet washing cost in Yankton, SD?

Fleet Washing typically costs $150-$800 per visit for a small fleet, and usually takes Depends on fleet size. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for fleet washing?

Fleet Washing is usually done with mobile wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is fleet washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule fleet washing?

Weekly to monthly. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Yankton, SD

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Graffiti Removal

Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface.

Typical $200-$800

Exterior Mold & Mildew Removal for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $250-$700

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Driveway Cleaning

Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish.

Typical $150-$400

Sidewalk & Walkway Cleaning

Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime.

Typical $100-$250

Deck Restoration & Staining

Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer.

Typical $800-$2,500

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

Patio Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

House Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$700

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Ready for a cleaner home or business?

Get a free pressure washing quote in Yankton, SD. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote